Unic-Carbon-P is PET-G based filament reinforced with 20% carbon fibers, which results in twice the stiffness!
Unic-Carbon-P 500gr
Unic-Carbon-P is PET-G based filament reinforced with 20% carbon fibers, which results in twice the stiffness!
Material
Similar to PET-G but reinforced with 20% carbon fibers. Carbon-P has increased impact and heat resistance. The filament has a nice matte surface and has nearly no warping.
This filament has abresive properties. When using a soft brass nozzle this will wear down when printing materials like these. You can replace the nozzle more often or you can use a hardened nozzle which is especially made for these types of filament.
Applications
- RC parts
- Drones
- Robotics
- Automotive
Origin
Unic-Filaments is our own high quality line of filaments. They have been tested on different types of printers at Unic-3D to ensure they fit the needs of our customers.
UNICAR2PLU0001
Data sheet
- Size
- 1,75mm or 2,85mm
- Weight
- 500gr
- Density
- 1,19 g/cc
- Print temperature
- 225-245˚C
- Bed temperature
- 35-60˚C
- Storage
- Cool and dry (15-25˚C) and away from UV light.
Specific References
- ean13
- 5407004170183
Related Products ( 16 other products in the same category )
